Here’s the crux of the article in video form:

New updates are being added at the bottom of this story…….

Original story (published on April 16, 2022) follows:

Insteon Hub is one of the most popular home automation platforms. Many users rely on it to set their Smart Home systems.

Insteon offers a catalog of IoT devices that you can use to control the lighting and electrical system of your home.

However, for a few hours now, the Insteon Hub devices suddenly stopped working, leaving many users with unusable devices. But, throughout this story we will leave you some of the best alternatives.

Insteon Hub devices suddenly down or not working

According to multiple reports, Insteon Hub platform is currently down for all users. The Insteon app, and even the Insteon support forums are also down at this time (1, 2, 3, 4, 5, 6, 7, 8, 9, 10).

insteon-hub-down-not-working-login-connectivity-issues-1
Source

RIP Insteon

As of this morning, my worst case scenario has come to pass… Insteon servers appear to be down and my hub is offline… This is the problem with having a single provider for the entire technology stack. I am no longer able to log into the app to manage devices… and it seems that all third party integrations, including Amazon Echo/Alexa automations, are not working 😠😡🤬🤯
Source

My Hub is now offline

I know Insteon is circling the drain but I was getting by because my current setup has been working. But today all of a sudden my Hub is down. Ethernet is fine, power is on, tried power cycling it, still the little red light is on the Hub. I tried calling Insteon support and get only a busy signal. Insteon support forum won’t load like it’s a dead website. Is Insteon fully dead now?
Source

This situation has brought serious difficulties to those users who completely relied on Insteon devices to control their home automation systems. Apparently, the outage occurred unexpectedly and without prior notice.

insteon-hub-down-not-working-login-connectivity-issues-2
Source

I agree. I also have a large set up. No announcement and no warning. If this is not an outage then it is a huge betrayal of trust.
Source

Best Alternatives to Insteon Hub home automation platform

Z-Wave and Zigbee

Wave and Zigbee are two wireless communication protocols that are especially popular among users of home automation systems.

Both protocols allow IoT devices to form a mesh network (with a hub in between) to communicate with each other instead of having to connect to your main router. This will avoid the saturation of your home network.

That said, these are some of the most popular brands that use the Zigbee protocol:

  • ADT Security Hub
  • Amazon Echo Plus
  • Belkin WeMo Link
  • Hive (heating devices)
  • Honeywell (smart thermostats)
  • Ikea Tradfri
  • GE Appliances (home electronics)
  • LG SmartThinq
  • Lux Konoz
  • Philips Hue
  • Samsung SmartThings
  • Sengled (smart bulbs)
  • Somfy
  • Hub Wink
  • Yale (smart locks)
  • Source

    And, some of the most recognized brands that support Z-Wave are the following:

  • ADT Security Hub
  • August (smart locks)
  • Fibaro
  • Honeywell (thermostats)
  • GE Appliances
  • Kwikset (smart locks)
  • LG SmartThinq
  • Logitech Home Harmony Hub Extender
  • Milo (home electronics)
  • GE Appliances
  • Samsung SmartThings
  • Somfy
  • Yale (smart locks)
  • Wink hub
  • Source

    Some names appear on both lists because they offer products that support both protocols for convenience.

    Lutron Caseta

    Lutron Caseta is a home automation platform for controlling the lighting system at home. It stands out for its robust operation and easy setup.

    Lutron RadioRA

    While Caseta is a Lutron product specifically aimed at controlling intelligent lighting systems, RadioRA is designed to control the entire home automation system.

    So, through RadioRA you can control everything from lights to temperatures and blinds in a simple way.

    Bonus: reuse your Insteon devices with Home Assistant

    Home Assistant is an Open Source tool that will allow you to keep your current Insteon devices working. However, it is the least friendly of all as it requires some advanced installation steps.

    If you want to know all the steps to follow to use Home Assistant, you can do it through this link.

    We will update this story if new events arise on the matter in the future.

    Update 1 (April 18)

    08: 55 am(IST): A report highlights that Insteon might not be coming back as the company could be shutting down. Rob Lilleness, president and chairman of Smartlabs, no longer lists Smartlabs/Smarthome/Insteon anywhere on his LinkedIn profile.

    Apart from that, several other top-level members of the management have also listed their roles ending in April 2022 or just 2022. This means it’s highly likely that the service will no longer work as expected.

    Update 2 (April 19)

    12:24 pm (IST): Users can also try OpenHab which is another open source alternative with Insteon support.

    Update 3 (April 20)

    04:45 pm (IST): Although Insteon Hub has been down for a few days, the official status page still shows — ‘All Services Online’ and ‘There are currently no known issues affecting Insteon services.’

    Update 4 (April 21)

    11:33 am (IST): HOOBS (HomeBridge Out Of the Box) hub is another alternative that users can try. You can check the details here.

    01:40 pm (IST): Insteon has now released an official statement regarding the recent issue on their platform.

    The company said that they are economically affected due to COVID-19. Moreover, they were trying to find investors, but it didn’t work out. More on that here.

    Thanks for the tip: Christopher Peter!

    Update 5 (April 23)

    12:55 pm (IST): While we had reported earlier that Insteon’s official status page showed all services were working fine, this page has now been taken down and is currently showing Error 404.

    Update 6 (April 25)

    01:15 pm (IST): One of our readers has confirmed that he was able to get voice activation working using Home Assistant. Thus, Home Assistant appears to be an easy solution for most users.

    Thanks for the tip: Christopher Peter!

    Update 7 (April 26)

    12:10 pm (IST): If you are having any trouble setting up the Home Assistant then here’s a video guide to do so:

    Update 8 (April 27)

    01:15 pm (IST): Here’s a list of hubs by GearBrain that are compatible with Insteon:

    – ISY-994i Pro Z-Wave/Insteon/X10

    – Universal Devices Polisy Gateway

    – Universal Devices Polisy Pro Gateway

    – Universal Devices ISY-994i ZW Gateway

    – Home Assistant Open Source Home Automation Platform

    – HomeSeer HomeTroller PRO Smart Home Hub

    – HomeSeer HomeTroller Plus Smart Home Hub

    – HomeSeer HomeTroller Pi Smart Home Hub

    Update 9 (June 13)

    12:29 pm (IST): Insteon support on Twitter has announced that the Insteon app is again available on Google Play Store and Apple App Store. You can read the full announcement here.

    Featured Image: Insteon

    PiunikaWeb started as purely an investigative tech journalism website with main focus on ‘breaking’ or ‘exclusive’ news. In no time, our stories got picked up by the likes of Forbes, Foxnews, Gizmodo, TechCrunch, Engadget, The Verge, Macrumors, and many others. Want to know more about us? Head here.

    Jean Leon
    1613 Posts

    A tech enthusiast since ever. I like to always be up to date on the latest news in the industry and write about it. Twitter: @jean_ERdC

    Next article View Article

    Google Drive not letting users play videos, throws 'allowed playbacks has been exceeded' error

    Google Drive users have been dealing with an issue for years where they get an 'allowed playbacks has been exceeded' error when trying to play videos. And Google has still...
    Feb 20, 2024 2 Min Read